Gas Burner RS/M Series
Technical data
- Modulating gas burners
- Available model : RS 34/M MZ, RS 44/M MZ, RS 50/M, RS 64/M MZ, RS 70/M, RS 100/M, RS 130/M, RS 190/M, RS 250/M MZ
- Maximun output range (kW) : 390 – 2650
- Power Supply Voltage (V) : 220 (RS 34/M MZ, RS 44/M MZ), 380
- Power Supply Frequency (Hz): 50
Specifications
RS 34/M MZ – 44/M MZ models
Monoblock forced draught gas burner with two stage progressive or modulating operation, with a specific kit, fully automatic, made up of:
- Air suction circuit with sound proofing material
- High performance fan with straight blades
- Air damper for air flow setting and butterfly valve for regulating fuel output controlled by a servomotor with variable cam
- Starting motor at 2800 rpm, single-phase / 230V / 50-60Hz or three-phase / 230-400V / 50-60Hz
- Combustion head, that can be set on the basis of required output, fitted with:
- stainless steel end cone, resistant to corrosion and high temperatures
- ignition electrodes
- ionisation probe
- gas distributor
- flame stability disk
- Exclusive patented HCS (Housing Cooling System) with high thermal insulation and air circulation with continuous air volume refresh for an active cooling system and avoid heat transfer to the electrical component housing
- Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
- Microprocessor-based burner safety control box, with diagnostic functions
- Plugs and Sockets for electrical connection, accessible from the external of the cover
- Burner on/off selection switch
- Manual or automatic output increase/decrease selection switch
- Flame inspection window
- Slide bars for easier installation and maintenance
- Protection filter against radio interference
- IP 40 electric protection level
Standard equipment:
- 1 gas train flange
- 1 flange gasket
- 4 screws for fixing the flange
- 1 thermal screen
- 4 screws for fixing the burner flange to the boiler
- 3 plugs for electrical connection (RS 34-44/M MZ single-phase)
- 4 plugs for electrical connection (RS 44/M MZ three-phase)
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue
RS 50/M MZ – 64/M MZ – 70/M – 100/M – 130/M – 150/M – 190/M – 250/M MZ models
Monoblock forced draught gas burner with two stage progressive or modulating operation, with a specific kit, fully automatic, made up of:
- Air suction circuit lined with sound-proofing material
- Fan with reverse curve blades (RS 50 – 70 – 100 – 130/M models) or straight blades (RS 64/M MZ – 150/M – 190/M – 250/M MZ models)
- Air damper for air flow setting and butterfly valve for regulating fuel output controlled by a servomotor with variable cam
- Starting motor at 2800 rpm, three-phase 400V with neutral, 50Hz
- Combustion head, that can be set on the basis of required output, fitted with:
- stainless steel end cone, resistant to corrosion and high temperatures
- ignition electrodes
- ionisation probe
- gas distributor
- flame stability disk
- Maximum gas pressure switch to stop the burner in the case of excess pressure on the fuel supply line
- Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
- Microprocessor-based burner safety control box, with diagnostic functions
- Burner on/off selection switch
- Manual or automatic output increase/decrease selection switch
- Flame inspection window
- Slide bars for easier installation and maintenance
- Protection filter against radio interference
- IP 44 electric protection level
Standard equipment:
- 1 gas train flange
- 1 flange gasket
- 4 screws for fixing the flange
- 1 thermal screen
- 4 screws for fixing the burner flange to the boiler
- Wiring loom fittings for the electrical connection (RS 64-50/M MZ)
- 2 slide bar extensions (for extended head models and RS 150-190/M models)
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue.
ติดต่อเรา
ท่านสามารถติดต่อสอบถามขอรายละเอียดการใช้งานสินค้าหัวพ่นไฟ หรือราคาได้ที่
Tel : 02-898-3000, 081-835-0842
หรือสามารถขอใบเสนอราคาได้ที่
Fax : 02-898-3336, 02-898-3323
E-mail : sales_bangkok@vanich.soodruk.com